Audio Dubbing - Canon ZR600 Instruction Manual

Audio Dubbing
You can add sound to a recording using the built-in microphone (MIC.IN).
~
only:
You can also record additional sound from external audio devices (AUDIO IN).
This function is operated with the wireless controller.
ht::~.~~~I%;TC;Q;t1:;g)~;;~;t;i"t\ig;];aitl@lt;x,t;e,I:,Dail:;AUd;i;girttleMj;~~
Refer also to the instruction manual of the connected device.
Audio device
(e.g. CD player)
OUTPUT
I
~~~
I
r13I~~
AUDIO SETUP
I~I
AUDIO DUB. AUDIO IN
1. Set the camcorder to
Lt'~I't'~I£§]J
mode and load a recorded cassette.
Use a tape recorded in SP, 12-bit mode with this camcorder.
2. Open the FUNC. menu, select (... T ) the
rl3
icon and press (@).
3. Select (... T ) the [AUDIO SETUP] menu and press (@). Then, select
(.~T)
the [AUDIO DUB.] option and press
(@ ).
4. Set it to [AUDIO IN] or [MIC.lN] and press (@) to save the changes,
then close the menu.
~:
Make sure the [MIC.IN] setting is selected.
5. Locate the scene you wish to start audio dubbing.
6. Press the PAUSE II button on the wireless
controller.
76