Table of Contents
Advertisement
Audio Recording
You can record sound in two audio modes-16-bit and 12-bit. The 12-bit mode records
sound on two channels (stereo 1), leaving 2 channels free (stereo 2) for adding new
sound later. Select the 16-bit mode for higher sound quality.
I
~~~)
I
r13I~~
AUDIO SETUP
I~I
AUDIO MODE 12bit
1. Open the FUNC. menu, select
(.T)
the
r13
icon and press (@).
2. Select
(.T)
the [AUDIO SETUP] menu and press (@). Then, select
(.T)
the [AUDIO MODE] option and press (@).
3. Set
(.T)
it to [16bit] or [12bit] and press (@) to save the changes,
then close the menu.
The selected audio mode is displayed for approximately 4 seconds.
The camcorder reduces the wind noise automatically. However, you can turn off the wind
screen when recording indoors, or when you want the microphone to be as sensitive as
possible.
* Only when [AUDIO DUB.] is set to [MIC.IN].
~~~)
I
r13I~~
AUDIO SETUP
H
WIND SCREEN AUTO
1. Open the FUNC. menu, select
(.T)
the
r13
icon and press (@).
2. Select
(.T)
the [AUDIO SETUP] menu and press (@). Then, select
(.T)
the [WIND SCREEN] option and press (@).
3. Set
(.T)
it to [OFF] and press (@) to save the changes, then close
the menu.
"~/f"
appears when you turn the wind screen off.
55
Hide quick links:
Advertisement
Table of Contents
