Canon ZR600 Instruction Manual page 25

r - - - - -
Program selector
I
Record Review
-
In record pause mode, this function allows you to review the last few seconds, of your
recording to check if it has been recorded properly.
1. Set the program selector to
[EJ •
2. If the joystick guide does not appear on screen,
press
(@ )
to display it.
3. Push the joystick ( .... ) momentarily towards
ffi
and
release it.
The camcorder rewinds the tape, plays back the last few
seconds, and returns to record pause mode.
Record Search
•
( []D)
In record pause mode, this function allows you to play back the tape (forward or reverse)
to locate the point where you wish to begin recording.
1. Set the program selector to
[EJ •
2. If the joystick guide does not appear on screen,
press (®) to display it.
•
( []D)
3. Hold the joystick pushed ( .... ) towards
ffi
to search
back towards the beginning of the recording or
@
Bill
fhU:=~~
t
lh~o~~:r~i~.
to search forward towards
~~ID>
=
• Release the joystick at the point where you wish to begin recording.
• The camcorder returns to record pause mode.
25