4.12.3 Diagnostics And Tests - Siemens RDG400 Basic Manual

Name
Diagnostics and test
d01 Application type
d02 X1 status
d03 X2 status
d04 D1 status
d05 Test mode for checking
actuator direction Y1/Y2
(press left button to escape)
32/44
Siemens
Building Technologies

4.12.3 Diagnostics and tests

Factory setting
Diagnostics
Diagnostics
Diagnostics
Diagnostics
---
RDG400 Basic Documentation
Range
0 = (no application)
1 = Single-duct
2 = Single-duct with electric heater
3 = Single-duct with radiator/floor heating
4 = Single-duct with H/C coil
0 = not activated (for DI)
1 = Activated (DI)
0...49 °C = Curr. temp. value (for AI)
00 = H/C input closed
100 = H/C input open
0 = not activated (for DI)
1 = Activated (DI)
0...49 °C = Curr. temp. value (for AI)
00 = H/C input closed
100 = H/C input open
0 = not activated (for DI)
1 = Activated (DI)
00 = H/C input closed
100 = H/C input open
"---" = no signal at outputs Y1 and Y2
OPE = output Y1 forced opening
ü
ü
ü
ü
ü
CE1P3182en
2015-05-20