Night Shot Menu; Dome Setup - Honeywell ScanDome II HSDN-251NS/PS Operation & Programming Manual

㿱LINE LOCK CONTROL
MODE
PHASE
EXIT (ESC TO EXIT)
㿱NIGHT SHOT MENU ( 251NS/PS model only )
The NIGHT SHOT option removes the IR cutoff filter of the camera and makes the camera
sensitive to near infrared. When NIGHT SHOT is ON , the color mode change B/W mode
automatically.
The operator can enable NIGHT SHOT for all dome cameras at the same time.
If the NIGHT SHOT mode is set to GLOBAL, "999' + Enter/Glbl will turn Off the NIGHT SHOT
mode
"888' + Enter/Glbl will turn On the NIGHT SHOT mode.
MODE
AUTO: Camera goes in to B&W mode at low light.
GLOBAL: Controlled by remote ("888'+Enter/Glbl).
MANUAL : ON/OFF will enable and disable Night Shot mode of an individual camera.

3.13 Dome Setup

LINE LOCK MENU
MODE :
PHASE :
EXIT (ESC TO EXIT)
INTERNAL / EXTERNAL
0~255
NIGHT SHOT SETUP
MODE
LOCAL CONTROL
EXIT (ESC TO CANCEL)
AUTO / MANUAL / GLOBAL
(Ninth Item of Main menu)
INTERNAL
004
Adjusts phase of picture with other
cameras in EXTERNAL mode.
: MANUAL
: OFF
22