Honeywell ScanDome II HSDN-251NS/PS Operation & Programming Manual page 25

1. Press Menu to display the main menu on the monitor. Select the Privacy Zone option by
pushing Joystick Up or Down and push to right to enter the detail menu.
2. Select the privacy zone number by pushing the joystick up or down.
3. To enter the zone name, rotate the handle clockwise or counterclockwise. You can select
alphanumeric characters by rotating the handle. Move to the next character position by
pushing the joystick to the right. To finish entering the title, push the Joystick down or
press the Enter key.
4. To adjust the "marked' (privacy) area, press and hold down the Ctrl/PGM key and then use
the joystick (direction and zoom) until you get desired view. Release the key, the right
column will be set to ON.
5. You can overwrite an existing zone. Use the Home key to delete the marked zone, or push
the joystick to the right or left to turn the stored zone On or Off.
6. Select the Save and Exit option by pushing the joystick up or down. Save and exit the
program by pushing the joystick to the right. Press ESC to exit the program without saving.
Press the Home key to delete programmed privacy zone.
PRIVACY ZONE SETUP
NO TITLE
01 xxxxxxxxxxxxxxxx
02 xxxxxxxxxxxxxxxx
03 xxxxxxxxxxxxxxxx
04 xxxxxxxxxxxxxxxx
05 xxxxxxxxxxxxxxxx
06 xxxxxxxxxxxxxxxx
07 xxxxxxxxxxxxxxxx
08 xxxxxxxxxxxxxxxx
SAVE AND EXIT ( ESC TO CANCEL)
HOLD DOWN CTRL KEY
WHILE SELECTION ZONE TO BE MASKED.
METHOD
ON BLOCK
OFF V.OFF
NONE ====
NONE ====
NONE ====
NONE ====
NONE ====
NONE ====
19