Honeywell ScanDome II HSDN-251NS/PS Operation & Programming Manual page 34

General
Certification
Electrical
Input Voltage
Power voltage
Power Consumption
Alarm Output
Alarm Input
Control
Access Time
ID (Camera Address)
Mechanical
Dimension
Weight
Pan Angle
Speed
Repeatability
Flip
Preset Position
Tour
Pattern
On-Screen Display
Environment
Operating temperature
Operating humidity
Storage temperature
Specifications are subject to change without notice.
CE EMC, FCC CLASS A
18 to 30 VAC; 24 VAC nominal, built-in power-line surge
Nominal 24 VAC/VDC 850mA maximum,
Maximum 20W
4 Normal relays 24 VDC/1A Max (selectable NC/NO)
8 Normal dry contact (selectable NC/NO)
RS-485/422 baud rate: 2400 ~230k bps (default:9600bps)
0.75 second maximum preset recall time
999 (Factory mode selectable over ID999 camera)
See Figure-9
Approx 1.4 kg
360 continuous rotation
0.1 to 90 /sec. (proportional to zoom)
360 /sec. maximum (with Ctrl/PGM key pressed)
Preset Speed : 380 /sec
0.2°
Rotate 180° at bottom of tilt
240 positions with camera status (16-character title)
8 tours
Four patterns, 240 second
Displays camera ID and area name on screen
0°C to 50°C (32°F to 122°F)
0 to 90%RH (non-condensing)
-20° C to 60° C (4° F to 140° F)
Figure 9• Dimension
28