Lubrication; Greasing The Machine - Toro 04351 Operator's Manual

Lubrication

Greasing the Machine

Lubricate the grease fittings regularly with No. 2 General
Purpose Lithium-Base Grease. If the you operate the
machine under normal conditions, lubricate all bearings
and bushings after every 50 hours of operation.
Locate the grease fitting as follows:
• Rear wheel bearings (1) (Figure 25)
Figure 25
• Steering fork shaft (1) (Figure 26)
Figure 26
• Lift arm pivot (3) and pivot hinge (3) (Figure 27)
Figure 27
• Pull frame shaft and roller (12) (Figure 28)
• Mow lift pivot (Figure 29).
• Lift cylinders (3) (Figure 30)
G011194
• Mow lockout lever (Figure 31).
27
Figure 28
Figure 29
Figure 30