Specifications; Attachments/Accessories - Toro 30881 Operator's Manual

Specifications

Note: Specifications and design are subject to change
without notice.
Width of cut
Overall width,
cutting units down
Overall width,
cutting units up
(transport)
Overall length
Height with ROPS
Ground clearance
Track Width, front
Track Width, rear
Wheel base
Net Weight (with
cutting units and
no fluids)
Cutting Deck
Length
Width
Height
Weight

Attachments/Accessories

A selection of Toro approved attachments and accessories is available for use with the machine to enhance and expand
its capabilities. Contact your Authorized Service Dealer or Distributor or go to www.Toro.com for a list of all approved
attachments and accessories.
To best protect your investment and maintain optimal performance of your Toro equipment, count on Toro genuine parts.
When it comes to reliability, Toro delivers replacement parts designed to the exact engineering specification of our equipment.
For peace of mind, insist on Toro genuine parts.
4500-D
2.8 m (109 inches)
286 cm (112.8 inches)
224 cm (88.25 inches)
370 cm (145.8 inches)
216 cm (85 inches)
15 cm (6 inches)
224 cm (88.3 inches)
141 cm (55.5 inches)
171 cm (67-1/2 inches)
1894 kg (4175 lb)
24.4 cm (9.6 inches) to carrier mount
26.7 cm (10–1/2 inches) at 3/4 inch height of cut
34.9 cm (13–3/4 inches) at 4 inch height of cut
20
4700-D
3.8 m (150 inches)
391 cm (153.8 inches)
224 cm (88.25 inches)
370 cm (145.8 inches)
216 cm (85 inches)
15 cm (6 inches)
224 cm (88.3 inches)
141 cm (55.5 inches)
171 cm (67-1/2 inches)
2,234 kg (4,925 lb)
86.4 cm (34 inches)
86.4 cm (34 inches)
88 kg (195 lb)