Navigating Through The Setup Menu - Onkyo TX-DS898 Instruction Manual

Setup menus
Advanced Menu
0.Hardware Setup
1.Speaker Setup
2.Input Setup
3.Audio Adjust
4.Preference
|ENTER|Quit:|SETUP|
Main menu

Navigating through the Setup menu

You can change settings using the buttons on the front panel and on
the remote controller.
The buttons on the remote controller correspond to those on the TX-
DS898 as shown below.
Button on remote controller
SETUP
(upper edge of
ENTER button)
(lower edge of
ENTER button)
(left edge of
ENTER button)
(right edge of
ENTER button)
ENTER
RETURN
1.Speaker Setup
1.Speaker Config
→Basic Menu
2.Speaker Distance
3.Level Calibration
4.Bass Peak Level
|ENTER|Quit:|SETUP|
Button on TX-DS898
SETUP
SETUP
UP
DOWN
LEFT
RIGHT
ENTER
ENTER
RETURN
RETURN
1-1.Speaker Config
Quit:|SETUP|
Menu
1. Press the SETUP button.
The main menu screen of the Main menu appears on your TV
monitor.
2. Using the and cursor buttons, select the menu
that you want to enter.
3. Press the ENTER button to enter the selected menu.
The screen for that menu appears.
4. Using the and cursor buttons, select the sub-
menu that you want to enter, and press the ENTER
button.
Each sub-menu has different settings that can be changed as
desired, and they are all explained below. To change a setting,
first select it using the and
the setting using the and
5. Press the RETURN button to set the new settings and
return to the previous menu screen, and again to
return to the main screen.
Note:
Press the SETUP button to exit the Setup menu immediately.
a.Subwoofer :Yes
b.Front :Small
c.Center :Small
d.Surround L/R:Small
e.Surround Bk :Small
f.Powered Zone2
:Not Activated
Quit:|SETUP|
Sub-menu
cursor buttons, and then change
cursor buttons.
27