Setup Menus - Onkyo TX-DS898 Instruction Manual

Setup menus

When making the various settings required to configure your TX-DS898 optimally, you can either use the OSD menu that appears on your
television monitor or you can use the display on the front of the TX-DS898. The OSD menu is a settings menu that is displayed on your TV
monitor. For use as reference when performing the setting procedures, this manual shows both the OSD menu displayed on your television
monitor and the display on the front of the TX-DS898.
The Setup menu consists of a main screen that is divided up into 5 menus: Hardware Setup, Speaker Setup, Input Setup, Audio Adjust, and
Preference. These menus are then divided up into various sub-menus, and these contain settings for you to optimize your home theater as you wish.
Basic Menu
Your TX-DS898 is provided with a
Basic Setup Menu for those that
have bought an AV receiver for the
first time and those that wish to
watch movies and listen to music
with the minimal amount of setup.
With the Basic Setup Menu, the
settings that rarely need to be set or
that are not needed for a reasonably
good degree of sound quality are not
displayed. Settings listed with
next to their name are settings that
can be set using the Basic Setup
Menu.
Basic Menu
0.Hardware Setup
1.Speaker Setup
2.Input Setup
3.Audio Adjust
→Advanced Menu
|ENTER|Quit:|SETUP|
Advanced Menu
The Advanced Menu provides an
Advanced Setup Menu with features
such as the Listening Mode Presets that
allow you to customize the output sound
for movies and music just the way you
like and the AV Sync Setup that allows
you to adjust for discrepancies between
the video and audio timing.
Advanced Menu
0.Hardware Setup
1.Speaker Setup
2.Input Setup
3.Audio Adjust
4.Preference
→Basic Menu
|ENTER|Quit:|SETUP|
26
0.Hardware Setup
1.Speaker Impedance
|ENTER|Quit:|SETUP|
1.Speaker Setup
1.Speaker Config
2.Speaker Distance
3.Level Calibration
|ENTER|Quit:|SETUP|
2.Input Setup
Input:DVD
1.Digital Setup
2.Multichannel Setup
3.Video Setup
4.Character Input
5.Intelli Volume
|ENTER|Quit:|SETUP|
3.Audio Adjust
1.Tone Control
2.Surround Speakers
3.Sound Effect
→default
0.Hardware Setup
1.Speaker Impedance
2.IR IN Setup
|ENTER|Quit:|SETUP|
1.Speaker Setup
1.Speaker Config
2.Speaker Distance
3.Level Calibration
4.Bass Peak Level
|ENTER|Quit:|SETUP| Quit:|SETUP|
2.Input Setup
Input:DVD
1.Digital Setup
2.Multichannel Setup
3.Video Setup
4.Character Input
5.Intelli Volume
6.Listening Mode Preset
|ENTER|Quit:|SETUP|
3.Audio Adjust
1.Tone Control
2.Surround Speakers
3.Sound Effect
4.Delay
5.LFE Level
6.Mono Setup
7.Theater Dimensional
8.Surround Setup
3.Audio Adjust
9.THX Setup
10.Mono Movie Setup
11.Enhanced 7 Setup
12.Orchestra Setup
13.Unplugged Setup
14.Studio Mix Setup
15.TV Logic Setup
→default
4.Preference 4.Preference
1.Volume Setup
1.Volume Setup
2.Headphone Level Setup 2.Headphone Level
3.OSD Setup 3.OSD Setup
4.OSD Position 4.OSD Position
|ENTER|Quit:|SETUP| Quit:|SETUP|