Onkyo TX-DS898 Instruction Manual page 18

Connections
9. TV monitor or projector
(MONITOR OUT)
Video input
S Video input
7, 8. Connecting a satellite tuner, television, or settop
box (VIDEO 3 or 4)
If the satellite tuner or television is equipped with an S video output
terminal, connect it to the S VIDEO 3 (or 4) IN terminal with an S
video cable. If it does not have an S video output terminal, connect
its video output terminal to the VIDEO 3 (or 4) IN terminal using an
RCA-type video connection cable. You do not need to connect to
both the S VIDEO 3 (or 4) IN and VIDEO 3 (or 4) IN terminals. If
the satellite tuner or television has component video outputs,
connect them to one of the COMPONENT VIDEO INPUT jacks.
With the initial settings of the TX-DS898, the VIDEO 3 and
VIDEO 4 input sources are set for the COMPONENT VIDEO
INPUT 2 jack.
If the video connection is made at COMPONENT VIDEO INPUT
1, this must be changed at the Setup menu: Input Setup → Video
Setup → Component Video (see page 35).
Using an RCA-type audio connection cable, connect the audio
output terminal on the satellite tuner or television to the same
VIDEO 3 (or 4) IN audio jacks on the TX-DS898. Make sure that
you properly connect the left channel to the L jack and the right
channel to the R jack.
If the device has a digital output jack as well, be sure to also connect
it to either a DIGITAL INPUT (COAXIAL) or DIGITAL INPUT
(OPTICAL) jack on the TX-DS898 depending on the device.
With the initial settings of the TX-DS898, the VIDEO 3 input source
is set for digital input at the OPTICAL 3 jack, and the VIDEO 4
input source is set for digital input at the OPTICAL 4 jack.
If the digital connection is made at a different jack, this must be changed
at the Setup menu: Input Setup → Digital Setup (see page 33).
9. Connecting a television monitor or projector
(MONITOR OUT)
The TX-DS898 is equipped with a simple Y/C separate circuit and
simple Y/C mixed circuit. Since both the signal from the S VIDEO
and VIDEO inputs are output to the MONITOR OUT S VIDEO
output, if the television or projector is equipped with an S video
input, it is unnecessary to connect the video connectors. If it is
equipped with only a video input, connect it to the MONITOR OUT
VIDEO output.
18
Y
P
Component video input
B
P
R
DIGITAL PRE
AUDIO
OUTPUT
TENNA R
OPT FRONT
1
R L
SUB
AM
2
COAX SURR
1
SURR
BACK/
ZONE 2
FM
2
75
FRONT
3
DIO
L
OPT
SUB
1 PH
SURR
2 CD
SURR
OUT
BACK
3
R
TAPE
4
GND IN
L R L
DIO AUDIO
DIGITAL
INPUT
COMPONENT
VIDEO
S VIDEO
VIDEO
OUTPUT
MONITOR
OUT
Y
OUT ZONE 2 P
B
IN DVD P
R
INPUT 1
OUT Y
VIDEO 1
IN P
B
OUT P
R
VIDEO 2
INPUT 2
IN Y
IN VIDEO 3 P
B
IN VIDEO 4
P
R
VIDEO S VIDEO
If the monitor or projector is equipped with an S video output
terminal, connect it to the MONITOR OUT S VIDEO terminal with
an S video cable. If it does not have an S video output terminal,
connect its video output terminal to the MONITOR OUT VIDEO
terminal using an RCA-type video connection cable. You do not
need to connect to both the MONITOR OUT S VIDEO and
MONITOR OUT VIDEO terminals. If the device has component
video inputs, connect them to the COMPONENT VIDEO OUTPUT
jacks.
Caution:
Note that the Setup menu will only be displayed on the monitor
connected to MONITOR OUT and not those connected to the
COMPONENT VIDEO OUTPUT jacks.
10. Connecting video camera, etc. (VIDEO 5)
If the device is equipped with an S video output terminal, connect it
to the S VIDEO 5 IN terminal with an S video cable. If it does not
have an S video output terminal, connect its video output terminal to
the VIDEO 5 IN terminal using an RCA-type video connection
cable. You do not need to connect to both the S VIDEO 5 IN and
VIDEO 5 IN terminals.
The VIDEO 5 digital input is fixed to the OPTICAL input on the
front panel.
S Video output
Digital output
(optical)
10. Video camera/Video game
(VIDEO 5/VIDEO CAM INPUT)
Video output
Analog output
8. Satellite tuner or television
(VIDEO 4)
Digital audio output
(optical)
R (red)
Analog audio
output
L (white)
Video output
S Video output
VIDEO 5 /VIDEO CAM INPUT
N
DIGITAL S VIDEO VIDEO L AUDIO R
Left (white)
Right (red)