Table of Contents
Advertisement
Inputting characters
While performing network settings or in the Internet radio
menu, etc., when the following appears on the display,
you can enter characters. Enter characters using the
following procedure.
1. Use the direction (
character or symbol and press the ENTER button.
Repeat this procedure to input more.
The following characters can be used.
0 A/a*: Changes the characters shown. (a
0 Space: Inputs a blank space that is one character
wide.
(left) /
(right): Moves the cursor in the text
0
input area.
0 BS (backspace)**: Deletes characters to the left of
the cursor. Move the cursor left.
0 aä: When this is displayed, you can select it to
change the characters shown to umlaut characters.
* You can also change them by pressing the [>10]
button.
** You can press the CLR button to delete all the input
characters at once.
2. After completing input, use the direction (
buttons to select "OK" and press the ENTER button.
30
, , , ,
ENTER
/
/
/
) buttons to select a
b)
/
/
Setup menu
SETUP
The unit allows you to configure advanced settings to
provide you with an even better experience. Set using the
following procedure.
1. Press the SETUP button.
2. Use the direction (
you want to change and press the ENTER button.
0 To cancel the operation, press the SETUP button.
3. Use the direction (
menu you want to change.
4. Use the direction (
values.
5. After you complete making settings, press the SETUP
button to quit the menu.
∫ 1. Digital Audio Input
You can change input assignment between the input
selectors and DIGITAL IN COAXIAL/OPTICAL jacks. If
you do not assign a jack, select "-----".
The default setting is as follows:
COAXIAL1
OPTICAL1
0 Sampling rates for PCM signals (stereo, mono) from a
digital input are 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz,
96 kHz/16 bit, 20 bit, and 24 bit.
∫ 2. Main Volume
Make the volume setting.
Maximum Volume: Set the maximum volume for the
volume control.
Off (default setting)
30 to 79
PowerOn Volume: Set the volume for when the unit is
turned on.
Last (default setting): The volume is the same as it
was when the unit was last switched to standby.
Min to Max
HeadphoneLevel: Set the volume level for when
/
)
headphones are used.
j12 dB to i12 dB (default setting: 0 dB)
Various settings
, , , ,
ENTER
RETURN
/
) buttons to select the setting
/
) buttons to select the sub
/
) buttons to change setting
: BD/DVD
: GAME
Hide quick links:
Advertisement
Table of Contents
