Controlling An Onkyo Dvd Player - Onkyo TX-DS898 Instruction Manual

Using remote controller
ON
RETURN
ENTER,
DISC
TOP MENU
AUDIO
ANGLE

Controlling an Onkyo DVD player

The
the TX-DS898 (see page 14).
1. Press the DVD MODE button.
2. Press the desired operation button.
Operation buttons:
ON: Turns the DVD player on and off
STDBY: Turns the DVD player off. (Some sets may not respond to
this button. In this case, use the ON button to put the DVD player in
the standby state.)
STDBY
SETUP: Displays the menu
DVD MODE
ENTER: Confirms the selection
RETURN: Return button
SETUP
TOP MENU or MENU: Displays the menu screen(s) recorded on
DVD media.
VOL
DISC
MENU
AUDIO: Press repeatedly to select an audio and/or language track
MUTING
recorded on a DVD-Audio/Video.
SUBTITLE
ANGLE: Press repeatedly to select a camera angle when a DVD-
Video is recorded with multiple angle playback.
DVD
operation SUBTITLE: Press repeatedly to select one of the subtitle languages
buttons
recorded on a DVD-Video.
SEARCH: Press to find the specific section on a disc where you
want to start playback.
RANDOM/R: Press to start random playback.
Numeric keys : Chapter/Track down
: Chapter/Track up
SEARCH
: Play
: Stop
: Fast reverse
: Fast forward
: Pause
OPEN/CLOSE
0, 1 to 9, +10: Numeric keys
You may also use the following buttons:
VOL
MUTING: Activates the muting function at the TX-DS898
Note:
When operating an Onkyo DVD player directly with the remote
controller without connecting the
necessary (see page 59).
connector of the Onkyo DVD player must be connected to
The DVD MODE button lights green.
The buttons shaded in the figure to the left are the operation
buttons that can be used to control an Onkyo DVD player.
: Moves the cursor
: Selects a disc in the DVD changer.
: Open/close the disc tray
: Adjusts the volume at the TX-DS898
terminals, pre-programming is
57