Listening To The Radio; Am Frequency Step Setup (Not North America And Europe); Listening To Am/Fm Stations - Onkyo TX-8555 Instruction Manual

Listening to the Radio

TUNING DOWN/UP
AM Frequency Step Setup
(not North America and Europe)
You must specify the AM frequency step used in your
area. Note that when this setting is changed, all radio
presets are deleted.
Use the receiver to perform the procedure below.
1
While pressing the [TUNER]
button, press the [TUNING
MODE] button.
Each press of the [TUNING MODE]
button switches the frequency step
and
setting between "10 kHz" and "9 kHz."
After the desired frequency step is
Release
displayed, release the [TUNER] button.
the button

Listening to AM/FM Stations

With the built-in tuner, you can enjoy AM and FM radio
stations.
1
Use the [TUNER] input selector
button to select AM or FM.
Receiver
In this example, FM has been selected.
Band
(Actual display depends on country.)
28
DIRECT TUNING
Number buttons
TUNER TUNING MODE
Frequency
Number
buttons
D.TUN
TUNING
/
2
Press the [TUNING MODE]
button so that the AUTO indicator
Receiver
appears or disappears from the
display.
Auto Tuning
To activate this mode, press the
[TUNING MODE] button to turn on
the "AUTO" indicator. In this mode,
you will receive the broadcast in stereo
sound.
Manual Tuning
To activate this mode, press the
[TUNING MODE] button to turn off
the "AUTO" indicator. In this mode,
you will receive the broadcast in
monaural sound.
3
Press the TUNING [
[UP ] button.
Receiver
You can also use the remote
controller's TUNING [
buttons or arrow [
tune the radio.
Auto Tuning
Searching stops when a station is
found.
Manual Tuning
The frequency stops changing when
you release the button.
Press the buttons repeatedly to change
the frequency one step at a time.
CLR
/
DOWN] or
]/[ ]
]/[ ] buttons to