Table of Contents
Advertisement
Controlling Other Components—Continued
Controlling an RI Dock
By pressing the Remote Mode button that has been
programmed with the remote control code for your RI
Dock, you can control your iPod in the RI Dock with the
following buttons.
The [DOCK] Remote Mode button is preprogrammed
with the remote control code for controlling an Onkyo
RI Dock.
When Using an RI Dock:
• Connect the RI Dock to the TAPE IN or VCR/DVR IN
L/R jacks.
• Set the RI Dock's
HDD/DOCK.
• See the RI Dock's instruction manual for more
information.
Press the appropriate
Remote Mode button first.
1
2
3
4
5
6
7
8
* With some components, certain buttons may not
work as expected, and some may not work at all.
42
MODE switch to HDD or
9
J
K
L
M
N
O
P
Q
R
A
ON/STANDBY button
Turns the iPod on or off.
Notes:
• This button does not turn the Onkyo DS-A2 or DS-
A2X RI Dock on or off.
• Your iPod may not respond the first time you press this
button, in which case you should press it again. This is
because the remote controller transmits the On and
Standby commands alternately, so if your iPod is
already on, it will remain on when the remote
controller transmits an On command. Similarly, if
your iPod is already off, it will remain off when the
remote controller transmits an Off command.
B
TOP MENU button
Works as a Mode button when used with a DS-A2
RI Dock.
C
Arrow [
]/[
] and ENTER buttons*
Used to navigate menus and select items.
D
Pause [ ] button
Pauses playback. (With 3rd generation iPod models,
it works as a Play/Pause button.)
E
Rewind [
] button
Press and hold to rewind
F
Fast Forward [
] button
Press and hold to fast forward.
G
PLAY MODE button
Selects play modes on components with selectable
play modes.
Works as a Resume button when used with a DS-A2
RI Dock.
H
DISPLAY button*
Turns on the backlight for 30 seconds.
I
+ + + +
− − − −
ALBUM
/
button*
Selects the next or previous album.
J
VOL [
]/[
] button (23)
Adjusts the volume of the AV receiver.
K
MENU button*
Displays a menu.
L
PLAYLIST [
]/[
Selects the previous or next playlist on the iPod.
M
Play [
] button
Starts playback. If the component is off, it will turn
on automatically. (With 3rd generation iPod
models, this button works as a Play/Pause button.)
N
Stop [ ] button
Stops playback and displays a menu.
O
Next [
] button
Selects the next song.
] buttons*
Hide quick links:
Advertisement
Table of Contents
