Listening To The Radio; Radio Frequency Setup - Onkyo TX-8020 Instruction Manual

Listening to the Radio

INPUT

Radio Frequency Setup

F
or radio tuning to work properly, you must specify the
radio frequency step used in your area.
Note that when this setting is changed, all radio presets
are deleted.
North American model (AM/FM):
10 kHz/200 kHz (default setting) or 9 kHz/ 50 kHz
European model (AM):
9 kHz (default setting) or 10 kHz
1 Use the receiver's [INPUT] selector, or the
remote controller's INPUT SELECTOR
buttons to select AM or FM.
2 Press the [SETUP] button on the remote
controller.
3 Use the arrow []/[] buttons to select
"AM/FM FreqStep" (North American model)
or "AM Freq Step" (European model), and
then press [ENTER].
North American model
European model
24
En-
TUNING F/H
TUNING MODE
Number
buttons
D.TUN
& /( / # /5 /
ENTER
SETUP
4
Use the arrow []/[] buttons to specify the
frequency.
North American model
European model
5 Press the [ENTER] button to confirm the
setting.
6 Press the [SETUP] button on the remote
controller to complete the setting.
Notes:
• This procedure can also be performed on the receiver
by using [SETUP], TUNING []/[], PRESET []/
[], and [ENTER].
• Press [RETURN] to return to the previous menu.
• This procedure will be cancelled if the [SETUP]
button is pressed before step 5.
ENTER