Brother dcp-9045cdn User Manual page 73

Print quality difficulties (continued)
Difficulties
Printed pages are smeared.
Printouts are too light.
Network difficulties
Difficulties
Cannot print over a wired Network. Make sure your machine is powered on and is on-line and in Ready mode. Print
Suggestions
The Paper Type setting may be incorrect for the type of print media you are using,
or the print media may be too thick or have a rough surface. (See Acceptable paper
and other media on page 10 and Basic tab in the Software User's Guide on the
CD-ROM.)
If this problem occurs when making copies, turn Toner Save mode to off in the
machine menu settings. (See Toner save on page 22.)
Set Toner Save mode to off in the Advanced tab in the printer driver. (See
Advanced tab in the Software User's Guide on the CD-ROM.)
Suggestions
the Network Configuration list to see your current Network settings. (See User
Settings List on page 23.) Reconnect the LAN cable to the hub to verify that the
cable and network connections are good. If possible, try connecting the machine
to a different port on your hub using a different cable. If the connections are good,
the upper LED of the back panel of the machine will be green.
Troubleshooting and routine maintenance
C
65