Brother dcp-9045cdn User Manual page 67

1
Front
f
Fix the new paper tray front to the
standard paper tray by putting the two
screws back in (taken out in d). Then
put the paper back in the paper tray and
put the paper tray firmly back into the
machine.
g
Plug the machine's power cord back into
the AC electrical socket first, and
reconnect all cables. Turn on the
machine's power switch.
h
2
i
4
3
The Auto Detect function is not available
under the following machine conditions:
If this situation occurs, you can manually
add the options you have installed. In
Available Options select the option you
have installed, click Add, and then click
Apply.
For Macintosh
The printer driver is already configured for
use with the lower paper tray. No additional
steps are required.
To set the paper size for the lower tray,
press Menu, 1, 2, 3. Press a or b to
choose A4, Letter, Legal,
Executive, A5, B5, B6 or Folio.
Press OK, and then press Stop/Exit.
®
For Windows users:
Go to Start > Control Panel > Printers
and Faxes. Right-click on your printer
icon and choose Properties. Choose
the Accessories tab and click Auto
Detect. When the optional lower tray
and paper size have been detected click
Apply.
Note
• The machine's power switch is off.
• The machine is in an error state.
• The machine is in a network shared
environment.
• The cable is not connected to the
machine correctly.
®
users:
Options
B
59