Brother dcp-9045cdn User Manual page 21

1
1 Feeding direction
Note
• Before you print envelopes, you must 'fan'
the stack to avoid paper jams and
misfeeds.
• Before you print a lot of envelopes, test
one to make sure that the print results are
what you want.
• Envelope joints that are sealed by the
manufacturer should be secure.
• DO NOT put different types of paper in the
paper tray at the same time because it
may cause paper jams or misfeeds.
• DO NOT print envelopes using duplex
printing.
• For correct printing, you must choose the
same paper size from your software
application as the paper in the tray.
• We recommend that you do not print
within 15 mm. of the edges of the
envelopes.
• See Acceptable paper and other
media on page 10.
Types of envelopes to avoid
CAUTION
DO NOT use envelopes:
• that are damaged, curled, wrinkled or an
unusual shape
• that are extremely shiny or textured
• with clasps, staples, snaps or tie strings
• with self-adhesive closures
• that are of a baggy construction
• that are not sharply creased
• that are embossed (have raised writing
on them)
• that were previously printed by a laser
machine
1
• that are pre-printed on the inside
• that cannot be arranged neatly when
stacked
• that are made of paper that weighs more
than the paper weight specifications for
the machine
• with edges that are not straight or
consistently square
• with windows, holes, cut-outs or
perforations
• with glue on the surface as shown in the
figure below
• with double flaps as shown in the figure
below
• with sealing flaps that have not been
2
folded at purchase
• with sealing flaps as shown in the figure
below
Loading paper and documents
2
13