Onkyo TX SR608 Instruction Manual page 48

Picture Adjust
Using Picture Adjust, you can adjust the picture quality
and reduce any noise appearing on the screen.
To view the TV picture while setting, press ENTER. To
return to the previous screen, press RETURN.
Note
• If you are using the analog RGB input, the following settings are
not available: "Film Mode", "Edge Enhancement", and "Noise
Reduction".
■
Game Mode
Off:
Game Mode off.
On:
Game Mode on.
If video signal delay occurs during playback on a video
component (i.e. game console), select the corresponding
input source and set the "Game Mode" setting to "On".
The delay will decrease but in return the picture quality
will become poor.
■
Wide Mode *1*2
This setting determines the aspect ratio.
Note
• When the "Game Mode" is set to "On", this setting is fixed at
"Full".
4 : 3:
Full:
En
48
Zoom:
Wide Zoom:
Auto:
According to the input signals and monitor output
setting, the AV receiver automatically selects the
"4 : 3", "Full", "Zoom" or "Wide Zoom" mode. For
the monitor output setting
■
Picture Mode *1*2
Thru:
The following settings are set to the default values:
"Film Mode", "Edge Enhancement", "Noise
Reduction", "Brightness", "Contrast", "Hue" and
"Saturation"
Custom:
You can set the following settings as you like: "Film
Mode", "Edge Enhancement", "Noise Reduction",
"Brightness", "Contrast", "Hue" and "Saturation"
Cinema:
Selected when the picture source is movie film, etc.
Game:
Select to use in connecting a game console.
With Picture Mode, you can change the following settings
to be suitable for the movie or game screen by one opera-
tion; "Film Mode", "Edge Enhancement", "Noise
Reduction", "Brightness", "Contrast", "Hue" or "Satu-
ration".
(➔ 39).