Samsung SNK-D5081 User Manual page 44

Load Default: If [Load Default] is selected, you can initialize the system to the ex-factory default.
Click "Load Default" and select items to be restored
Load Settings: Load parameters in the removable storage device to NVR.
Save Settings: Save the set parameters of user‟s NVR to the removable storage device.
IPC Upgrade: IPC can be upgraded by the connected NVR. Decompress IPC upgrading file and
copy *.sw file to nvrupgrade directory and copy to the root directory of USB flash drive, Insert the
USB flash drive into USB port of NVR—>Select the IPC you want to upgrade—>Click Upgrade to
start upgrading IPC.
IPC Load Default: Click "IPC Load Default" and then click "OK" to confirm. Then it will prompt that
IPC is loaded default successfully and IPC will be restarted. Click "Select All" is to select all
channels to do load default for all cameras. "Clear" is to clear all selection, and "Exit" is to exit.
Note: Do not take out the USB memory or turn the power off during upgrading. When the update is
done, system will be automatically restarted. After about 5 minutes, the upgrading will be finished. It
is recommended to load ex-factory default after upgrading. The auto maintain function can be
effective only when the NVR returns back to Preview mode with no any operation within the set auto
maintain time.
44