Power Cable Water Proofing - Samsung SNK-D5081 User Manual

1.9 Power cable Water Proofing

When you install it outside of the building, please waterproof the power cable with waterproof butyl
rubber tape (can be purchased in hardware stores) so that water does not leak to the gap of the cable.
1. Connect the power cables.
2. Wrap the cable jacket (Area A) and the cable connection area with waterproof (butyl rubber) tape so
that more than half of the butyl rubber tape is overlapped.
If the connected cable jacket is poorly wrapped, water can leak into the connectors causing
damage to the camera.
Waterproofing butyl tape is made of butyl rubber that can extend twice as long as its original length.
If the power cable terminal is not in use, wrap it with waterproofing tape.
13