Web Application Manager Login - Samsung SNK-D5081 User Manual

Shut down Mac SAFARI browser and restart it, and then enter IP address of NVR in address bar to
access login page.
Note: The above instructions are for first time installations. You can use the same plug-in for IE and
Google Chrome. If plug-in for windows OS was installed on IE or Google Chrome once, you need to
use IE which needs to be run as administrator. Use Google Chrome to log in to NVR.
If you use Google Chrome to log in, please use Version 41 or lower. If you use V42 to V44 to log in,
you need to enable NPAPI plug-ins. You can enter chrome://flags/#enable-npapi on URL bar of
Google Chrome to find and enable NPAPI. Please note that it doesn‟t support V45 or above.
When you do a firmware upgrade, you have to re-download and re-install the plug-in. Based on
different situations, it may not be able to install the plug-in through browsers. In this case, please
copy and install the plug in on the CD attached (Web_plugin_Windows_YYYY_MM_DD.exe for
Windows system, and SurveillanceClient_Mac_YYYY_MM_DD.dmg for Mac).
.

4.2 Web Application Manager Login

After plugin installation, please input user name and password, select Sub Stream or Mobile
Stream (In general, select SubStream for intranet and MobileStream for extranet.), and select
language in the interface. There is an option for opening all channel preview, select it to open all
live pictures. Press Login to log in client and visit NVR remotely. Set password as per introductions
of user management in system setting.
52