Connecting A Satellite, Cable, Terrestrial Set-Top Box, Or Other Video Source - Onkyo HT-RC160 Instruction Manual

Connecting the AV Receiver—Continued

Connecting a Satellite, Cable, Terrestrial Set-top box, or Other Video Source

With this hookup, you can use your satellite or cable receiver to listen to your favorite TV programs
Hint!
via the AV receiver, useful if your TV has no audio outputs.
Step 1: Video Connection
Choose a video connection that matches the video source (
You must connect the AV receiver to your TV via the same type of connection.
Step 2: Audio Connection
Choose an audio connection that matches the video source ( ,
• With connection
• To enjoy Dolby Digital and DTS, use connection
.)
c
Connection
COMPONENT VIDEO IN 2 (CBL/SAT)
A
B
a
DIGITAL IN COAXIAL 2 (CBL/SAT)
b
c
Connect one or the other
Connection c must be assigned (see page 41)
30
, you can listen to and record audio from the video source and listen in Zone 2.
a
AV receiver
CBL/SAT IN V
CBL/SAT IN L/R
DIGITAL IN OPTICAL 2 (CD)
c
b
A
OPTICAL COAXIAL
OUT OUT
or , and then make the connection.
)
A B
, or ), and then make the connection.
a b c
or . (To listen in Zone 2 as well, use
b c
Signal flow
⇐
⇐
⇐
⇐
⇐
L
Y P P AUDIO
B R
OUT
COMPONENT VIDEO OUT
Satellite, cable, set-top box, etc.
and , or
a b
Video source
Component video output
Composite video output
Analog audio L/R output
Digital coaxial output
Digital optical output
B B
a
R
VIDEO
OUT
and
a