Connecting A Dvd/Bd Player - Onkyo HT-RC160 Instruction Manual

Connecting the AV Receiver—Continued

Connecting a DVD/BD Player

See "Connecting Components with HDMI" on page 22 for HDMI connection information.
Step 1: Video Connection
Choose a video connection that matches your DVD/BD player (
You must connect the AV receiver to your TV via the same type of connection.
Step 2: Audio Connection
Choose an audio connection that matches your DVD/BD player ( ,
• With connection , you can listen to and record audio from a DVD/BD and listen in Zone 2.
a
• To enjoy Dolby Digital and DTS, use connection
or and .)
a c
• If your DVD/BD player has main left and right outputs and multichannel left and right outputs, be sure to use
the main left and right outputs for connection
Connection
COMPONENT VIDEO IN 1 (DVD/BD)
A
B
a
DIGITAL IN COAXIAL 1 (DVD/BD)
b
DIGITAL IN OPTICAL 1 (GAME)
c
c
b
A
Connect one or the other
Connection c must be assigned (see page 41)
b
.
a
AV receiver
DVD/BD IN V
DVD/BD IN L/R
OPTICAL COAXIAL
OUT OUT
COMPONENT VIDEO OUT
or , and then make the connection.
)
A B
, or ), and then make the connection.
a b c
or . (To record or listen in Zone 2 as well, use
c
Signal flow
⇐
Component video output
⇐
Composite video output
⇐
Analog audio L/R output
⇐
⇐
L R
Y P P AUDIO
B R
OUT
DVD/BD player
and
a
DVD/BD player
Digital coaxial output
Digital optical output
B B
a
VIDEO
OUT
,
b
27