Table of Contents
Advertisement
Controlling Other Components—Continued
Controlling an RI Dock
By pressing the REMOTE MODE button that's been
programmed with the remote control code for your RI
Dock, you can control your iPod in the RI Dock with the
following buttons.
The [DOCK] button is preprogrammed with the remote
control code for controlling an RI Dock when used with
an
connection.
For some RI docks, the "ON/STANDBY" button may
not work with a remote control code 82990 (without RI).
In this case, make an RI connection and enter a remote
control code 81993 (with RI).
For details on entering a remote control code, see
page 60.
When Using an RI Dock:
• Connect the RI Dock to the TV/TAPE IN, CBL/SAT
IN, or VCR/DVR IN L/R jacks.
• Set the RI Dock's RI MODE switch to "HDD" or
"HDD/DOCK".
• Set the AV receiver's Input Display to "DOCK" (see
page 37).
• See to the RI Dock's instruction manual for more
information.
Press the appropriate
REMOTE MODE button first
*
With some components, certain buttons may not
work as expected, and some may not work at all.
64
ON/STANDBY button
Turns the iPod on or off.
Notes:
• This button does not turn the Onkyo DS-A2 or
DS-A2X RI Dock on or off.
• Your iPod may not respond the first time you
press this button, in which case you should press
it again. This is because the remote controller
transmits the On and Standby commands
alternately, so if your iPod is already on, it will
remain on when the remote controller transmits
an On command. Similarly, if your iPod is
already off, it will remain off when the remote
controller transmits an Off command.
TOP MENU button
Works as a Mode button when used with a DS-A2
RI Dock.
Arrow [ ]/[ ] and ENTER buttons*
Used to navigate menus and select items.
Previous [
] button
Restarts the current song. Press it twice to select the
previous song.
Fast Reverse [
] button
Press and hold to Fast Reverse.
Pause [ ] button
Pauses playback. (With 3rd generation iPod models,
it works as a Play/Pause button.)
REPEAT button*
Used with the repeat function.
DISPLAY button*
Turns on the backlight for 30 seconds.
MUTING button (39)
Mutes or unmutes the AV receiver.
ALBUM +/– button*
Selects the next or previous album.
VOL [ ]/[ ] button (38)
Adjusts the volume of the AV receiver.
MENU button*
Displays a menu.
PLAYLIST [ ]/[ ] buttons*
Selects the previous or next playlist on the iPod.
Play [
] button
Starts playback. If the component is off, it will turn
on automatically. (With 3rd generation iPod models,
this button works as a Play/Pause button.)
Next [
] button
Selects the next song.
Fast Forward [
] button
Press and hold to fast forward.
Stop [ ] button
Stops playback and displays a menu.
Hide quick links:
Advertisement
Table of Contents
