Table of Contents
Advertisement
Advanced Setup—Continued
5. Level Cal (Speaker Levels Calibration)
You can set the volume level of each speaker so that all speakers can be heard equally at the listening position. A pink
noise test tone is output by the front left speaker.
Notes:
• Speakers that you set to "No" or "None" in the "3. Sp Config" (page 52) do not output the test tone.
• The speaker levels cannot be adjusted while a pair of headphones is connected, speaker set B is on, or the AV receiver
is muted.
Left, Center, Right, SurrRight, SurrLeft, Subwoofer
The levels can be adjusted from –12 to +12 dB in 1 dB steps (–15 to +12 dB for the subwoofer).
6. Equalizer (Equalizer Settings)
Here you can adjust the tone of individual speakers. To set the volume of individual speakers, see page 54.
Notes:
• While the Direct listening mode is selected, the equalizer settings have no effect.
• The equalizer setting cannot be changed while a pair of headphones is connected, or speaker set B is on.
EQ
54
Audyssey: Listening environment is equalized by Audyssey EQ™. "Dynamic EQ" and
"Dyn Vol" become available (page 56).
Off: Tone off, No equalizing apply (default).
Hide quick links:
Advertisement
Table of Contents
