Maintenance; Recommended Maintenance Schedule(S) - Toro 22196 Operator's Manual

Maintenance

Note: Determine the left and right sides of the machine from the normal operating position.

Recommended Maintenance Schedule(s)

Maintenance Service
Interval
After the first 5 hours
Before each use or daily
Every 25 hours
Every 50 hours
Every 100 hours
Every 250 hours
Important: Refer to your Engine Operator's Manual for additional maintenance procedures.
CAUTION
If you leave the wire on the spark plug, someone could accidently start the engine and seriously injure
you or other bystanders.
Disconnect the wire from the spark plug before you do any maintenance. Set the wire aside so that it does
not accidently contact the spark plug.
Maintenance Procedure
• Change the engine oil.
• Check the engine oil level.
• Check the operation of the blade brake clutch.
• Inspect the air cleaner elements.
• Inspect the blade for wear or damage.
• Clean under the machine housing.
• Clean the discharge tunnel and the discharge tunnel plug.
• Lubricate the pivot arms.
• Clean the air filter elements. Clean them more frequently in dusty operating
conditions.
• Change the engine oil.
• Sharpen or replace the blade.
• Clean the blade brake clutch shield.
• Lubricate the gear case.
• Inspect and adjust the spark plug; replace it if necessary.
• Adjust the self-propel drive.
• Service the wheels.
• Adjust the blade brake cable.
• Clean under the belt cover.
• Replace the air cleaner elements. Replace them more frequently in dusty operating
conditions.
• Replace the spark plug.
20