Installing The Fuel Tank - Toro 22196 Operator's Manual

3

Installing the Fuel Tank

Parts needed for this procedure:
2 Self-tapping screw
1 Fuel tank
1 Hose clamp
Procedure
1. Slide the plastic clips, on the front of the fuel tank,
onto the fuel tank mount (Figure 5).
1. Fuel tank plastic clip (2)
2. Secure the bottom of the fuel tank to the fuel tank
bracket by installing the self-tapping screws from the
bottom. Torque the screws to 40 to 50 in-lb (4.5
to 5.6 N-m).
3. Insert the hose clamp onto the fuel line from the fuel
filter (Figure 6).
g018740
Figure 5
1. Fuel filter
2. Hose clamp
4. Slide the end of the fuel line onto the fuel tank fitting
(Figure 6).
5. Secure the fuel line to the fuel tank with the hose clamp
(Figure 6).
9
4
1
2 3
Figure 6
3. Fuel line
g01804