To comply with CEN standard EN 836:1997, ISO standard 5395:1990 and ANSI/OPEI B71.4–1999 Standard, rear weight
must be added to rear of traction unit. Use chart below to determine weight requirements. Order parts from your local
Authorized Toro Distributor.
Note: A rear weight kit, part no. 24–5780 is supplied with Model No. 30630.
Two Wheel Drive
Cutting Unit
Rear Weight
Description
Required
72 Side Discharge
70 lb.
(Model No. 30722)
72 Rear Discharge
70 lb.
(Model No. 30710)
Guardian 72
70 lb.
Recycler
(Model No. 30716)
72" Flex Deck
210 lb.
(Model 30799)
Four Wheel Drive
Cutting Unit
Rear Weight
Description
Required
72" Flex Deck
70 lb.
(Model 30799)
Install Rear Weight
Weight Part
Number
24–5780
(two 35 lb. weights and mounting hardware)
24–5780
(two 35 lb. weights and mounting hardware)
24–5780
(two 35 lb. weights and mounting hardware)
24–5780
(two 35 lb. weights and mounting hardware)
Weight Part
Number
24–5780
(two 35 lb. weights and mounting hardware)
24
Weight Description
Rear Weight Kit
Rear Weight Kit
Rear Weight Kit
Rear Weight Kit
Weight Description
Rear Weight Kit
Qty.
1
1
1
3
Qty.
1