Greasing the Traction Unit
Before the machine is operated, it must be greased to assure
proper operating characteristics; refer to Lubrication
Maintenance. Failure to grease the machine will result in
premature failure of critical parts.
To comply with ANSI/OPEI B71.4–1999 Standard, rear weight must be added to rear of traction unit. Use chart below to
determine weight requirements. Order parts from your local Authorized Toro Distributor.
Cutting Unit
Rear Weight
Description
Required
72 Side Discharge
(Model No. 30722)
or
72 Rear Discharge
105 lb.
(Model No. 30710)
or
Guardian 72
Recycler
(Model No. 30716)
72" Flex Deck
210 lb.
(Model 30799)
Note: After setup has been completed, remove protective
edging (used for shipping) from fenders.
Install Rear Weight
Weight Part
Number
24–5780
(two 35 lb. weights and mounting hardware)
&
24–5790
325–8
3253–7
3–8847
3217–9
24–5780
(two 35 lb. weights and mounting hardware)
18
Weight Description
Rear Weight Kit
&
Rear Weight Kit
(one 35 lb. weight)
Capscrew 1/2–13 x 2"
Lockwasher 1/2"
Spacer
Nut 1/2"
Rear Weight Kit
Qty.
1
1
2
2
2
2
3