Connecting Components With Digital Outputs - Onkyo HTX-22HDXPAW Instruction Manual

Connecting AV Components

Connecting Components with Digital Outputs

You can connect components with digital audio outputs to the HTX-22HDX's DIGITAL COAX-
IAL IN 1, OPTICAL IN 2, and OPTICAL IN 3 inputs. Choose a digital input (coaxial or optical)
that matches the digital audio output on your source component. To enjoy Dolby Digital and
DTS, you must connect your Blu-ray/DVD player/recorder with an optical or coaxial digital
audio cable. If your Blu-ray/DVD player/recorder supports HDMI, you can use an HDMI con-
nection instead (see page 49).
Notes:
• If your TV supports the Audio Return Channel in HDMI Version 1.4, and your TV is con-
nected to the HTX-22HDX via HDMI, a digital audio connection (coaxial or optical) from
your TV to the HTX-22HDX is not necessary (see page 49).
• On some source components, Dolby Digital and DTS output may be turned off by default, in
which case you'll need to turn it on.
• If one of your source components is noticeably louder or quieter than your others, use the
IntelliVolume function to adjust its input level (see page 42).
CD player, etc.
Blu-ray/DVD player/recorder,
set-top box, etc.
Games console,
TV, computer, etc.
—Continued
Coaxial digital audio cable
(not supplied)
Optical digital audio cable
(not supplied)
AC INLET
CAUTION :
SPEAKER IMPEDANCE
6 ~ 16Ω/SPEAKER
21