Connecting Your Amp - Onkyo DV-S155X Instruction Manual

DV-S155X-En.book Page 17 Saturday, July 24, 2004 2:20 PM
Connections —Continued

Connecting your amp

• Refer to the Instruction Manual of your amp as well as the instructions given here.
• Before you make connections, turn off the power of all the equipment you're going to con-
nect, and disconnect all power cords from electrical outlets. Don't plug in the DV-S155X's
power cord yet.
• When making connections, make sure that the plug is
inserted all the way into the jack.
Note
Since the DV-S155X contains components that are vulnerable to heat, don't place it on top of an
amp or other source of heat. Doing so can cause malfunctions.
1 Connect an amp that supports Dolby Digital or DTS, such as the PR-155X
This allows you to enjoy Dolby Digital or DTS audio.
2 Connect the audio inputs of your television
■ Connecting the PR-155X
Use an optical cable to connect the DV-S155X's AUDIO OUTPUT DIGITAL OPTICAL jack
to the optical digital input jack of your amp.
Use the included audio connection cable to connect the DV-S155X's AUDIO OUTPUT ANA-
LOG jacks to the audio input jacks of your amp.
Tip
You can enjoy 5.1 ch playback with DVD video simply by connecting the digital jack. However
you will need to make the analog connections as well if you want to perform analog recording
from the DV-S155X onto an MD recorder or other device connected to the amp, or in order to
enable system operation with an Onkyo-manufactured amp.
DV-S155X
DVD PLAYER
DV-S 155X
Optical cable (included)
Audio connection cable (included)
Incomplete connection
Insert all the way in
PR-155X
AV CONTROLLER
AAC PCM DIGITAL DTS PL DSP STEREO ( GRN ) MASTER VOLUME
MULTI IN ( RED )
STANDBY
STANDBY / ON SW LV L CTRL MEMORY TIMER INPUT MULTI JOG
CLEAR
PHONES
SURROUND
PUSH TO ENTER
-
PR 155X
DVD/CD
DIGITAL
OPTICAL IN
L
R
17