Advertisement
Quick Links
5.1ch Home Theater Speaker Package
Front speaker (SKF-528)
(White)
(Red)
Front speakers
*1
Speaker cables 3.5 m
*1
For magnetic shielding.
*2
Non-magnetic shielding.
*3
Configuration of the rubber stoppers may be different from the figure, such
as being 2 sheets instead of 1 sheet, but the total number will be same.
Keyhole slot
Speaker terminals
SKF-528
SKR-528
Wall Mounting
To mount the front/surround speakers vertically, use
the keyhole slot shown to hang each speaker on a
screw that's securely screwed into the wall.
Keyhole slot for
wall mounting
Thick rubber
stoppers
Using the Rubber Stoppers for a More Stable Platform
We recommend using the supplied rubber stoppers to
achieve the best possible sound from your speakers.
The rubber stoppers prevent the speakers from mov-
ing, providing a more stable platform. Use thick stop-
pers for the center speaker, and thin stoppers for the
other speakers.
Enjoying Home Theater
The Home Theater means that you can enjoy surround sound with a real sense of movement in your own home — just like being in
a movie theater or concert hall.
Corner
1/3 of wall
position
position
Connecting the Speakers
Front right
Powered
speaker
subwoofer
Red
*
Using the supplied RCA cable,
connect the subwoofer's LINE
INPUT to your AV receiver's PRE
OUT SUBWOOFER jack.
Surround right
speaker
E
SKS-HT528
n
Surround speaker (SKR-528)
(Blue)
Surround speakers
*2
Speaker cables 8.0 m
16 thin rubber stoppers
Speaker terminals
SKC-528
Keyhole slots
To mount the center speaker horizontally, use the two
keyhole slots shown to hang each speaker on two
screws that are securely screwed into the wall.
Keyhole slots for wall mounting
Thick rubber
stoppers
217 mm
Thin rubber stoppers
Bottom of the
Bottom of the
SKF-528
SKR-528
Front left and right speakers (SKF-528)
They should be positioned facing the listener at about ear level, and equally
spaced from the TV. Angle them inward slightly so as to create a triangle, with
the listener at the apex.
Center speaker (SKC-528)
Position it close to your TV (preferably on top) facing forward at about ear
level, or at the same height as the front left and right speakers.
Surround left and right speakers (SKR-528)
Position them at the sides of the listener, or slightly behind, about 60 to 100 cm
above ear level. Ideally they should be equally spaced from the listener.
Subwoofer (SKW-501E)
The subwoofer handles the bass sounds of the LFE (Low-Frequency Effects)
channel. The volume and quality of the bass output from your subwoofer will
depend on its position, the shape of your listening room, and your listening
position. In general, a good bass sound can be obtained by installing the sub-
woofer in a front corner, or at one-third the way along the front wall, as shown.
Front left
speaker
Center speaker
Green
White
Speaker Connection
Precautions
Read the following before connecting your
speakers:
• Turn off your receiver before making any
connections.
• Pay close attention to speaker
Blue
wiring polarity. Connect posi-
Gray
tive (+) terminals to only pos-
itive (+) terminals, and
negative (–) terminals to only negative (–)
terminals. If the speakers are wired incor-
Surround left
rectly, the sound will be out of phase and
speaker
will sound unnatural.
• Be careful not to short the positive and
negative wires. Doing so may damage
your amp.
Caution
• With other audio-video components, connect
the subwoofer's LINE INPUT to the subwoofer
pre out jack of your equipment. Never plug any
kind of musical instrument to the subwoofer.
Center speaker (SKC-528)
(Gray)
Speaker cable 3.0 m
Center speaker
*1
12 thick rubber stoppers
*3
Caution
• The front grilles are not designed to be removed so
do not attempt to remove them forcibly, as this will
damage them.
Caution
• A mounting screw's ability to sup-
port a speaker depends on how
well it's anchored to the wall. If
you have hollow walls, screw each
mounting screw into a stud. If
there are no studs, or the walls are
solid, use suitable wall anchors.
Use screws with a head diameter of 9 mm or less and
a shank diameter of 4 mm or less. With hollow walls,
use a cable/pipe detector to check for any power
cables or water pipes before making any holes.
• Leave a gap of between 5 mm and 10 mm between
the wall and the base of the screw head, as shown.
(We recommend that you consult a home installation
professional.)
Thick rubber stoppers
Bottom of the
SKC-528
12 mm
Specifications
■
Powered Subwoofer (SKW-501E)
Type
Rated output Power (IEC)
Input sensitivity/impedance
Frequency response
Cabinet capacity
Dimensions (W × H × D)
Weight
Drivers unit
Power supply
Power consumption
Other
■
Front Speakers (SKF-528)
Type
Impedance
Maximum input power
Output sound pressure level
Frequency response
Cabinet capacity
Dimensions (W × H × D)
Weight
Drivers unit
Terminal
Keyhole slot
Grille
Other
2-1, Nisshin-cho, Neyagawa-shi, OSAKA 572-8540, JAPAN
Tel: 072-831-8023 Fax: 072-831-8163
http://www.onkyo.com/
18 Park Way, Upper Saddle River, N.J. 07458, U.S.A.
Tel: 800-229-1687, 201-785-2600 Fax: 201-785-2650
http://www.us.onkyo.com/
Liegnitzerstrasse 6, 82194 Groebenzell, GERMANY
Tel: +49-8142-4401-0 Fax: +49-8142-4208-213
http://www.eu.onkyo.com/
The Coach House 81A High Street, Marlow, Buckinghamshire, SL7 1AB, UK
Tel: +44-(0)1628-473-350 Fax: +44-(0)1628-401-700
Unit 1033, 10/F, Star House, No 3, Salisbury Road, Tsim Sha Tsui Kowloon, Hong Kong.
Tel: 852-2429-3118 Fax: 852-2428-9039
http://www.onkyochina.com/
1301, 555 Tower, No.555 West NanJin Road, Jin an, Shanghai,
China 200041, Tel: 86-21-52131366 Fax: 86-21-52130396
http://www.cn.onkyo.com/
SN 29400527B
(C) Copyright 2012 Onkyo Sound & Vision Corporation Japan. All rights reserved.
Powered subwoofer (SKW-501E)
(Green)
Subwoofer
*2
*2
Non-magnetic shielding.
■
Front
*3
■
Rear
Wall
To AC outlet
Note
5 to 10 mm
• The Auto Standby function turns the subwoofer on when the input signal exceeds a certain
level. If the Auto Standby function does not work reliably, try slightly increasing or
decreasing the subwoofer output level on your receiver.
• If the Standby/On indicator lights (both red and blue LEDs) several seconds or minutes
after the sound output stopped, this means that the amp protection circuit has been acti-
vated. In this case, set the OUTPUT LEVEL control to the center position, and disconnect
the power cord from the AC outlet. Wait at least 10 seconds, and then reconnect the power
cord. If that doesn't solve the issue, contact your Onkyo dealer.
Setting the Subwoofer Level
To set the level of the subwoofer, use the OUTPUT LEVEL control.
Set it so that bass sounds are evenly balanced with the treble sounds
from the other speakers. Because our ears are less sensitive to very
low bass sounds, there's a temptation to set the level of the sub-
woofer too high. As a rule of thumb, set the subwoofer level to what
you think is the optimal level, and then back it off slightly.
Using the Floor Pads for Subwoofer
If the subwoofer is placed on a hard floor
55 mm
(wood, vinyl, tile, etc.) and playback is very
loud, the subwoofer's feet may damage the
flooring. To prevent this, place the supplied
pads underneath the subwoofer's feet. The pads
also provide a stable base for the subwoofer.
■
Center Speaker (SKC-528)
Bass-reflex
Type
80 watts minimum continuous power,
Impedance
4 ohms, driven at 100 Hz with a
Maximum input power
maximum total harmonic distortion of
Output sound pressure level
1 %
Frequency response
410 mV / 20 kΩ
Cabinet capacity
27 Hz to 150 Hz
Dimensions (W × H × D)
24.5 L (0.865 cubic feet)
230 mm × 425 mm × 412 mm
(9-1/16" × 16-3/4" × 16-1/4")
Weight
(incl. grille and projection)
Drivers unit
9.1 kg (20.1 lbs)
Terminal
20 cm (8") Cone Woofer
Keyhole slot
AC 220 – 240V
50/60 Hz
Grille
105 W
Other
Auto Standby function
■
Surround Speakers (SKR-528)
Type
Full Range Bass-reflex
Impedance
6 Ω
Maximum input power
120 W
Output sound pressure level
81 dB/W/m
Frequency response
80 Hz to 20 kHz
Cabinet capacity
1.1 L (0.039 cubic feet)
Dimensions (W × H × D)
101 mm × 175 mm × 116 mm
(4" × 6-7/8" × 4-9/16")
(incl. grille and projection)
Weight
0.7 kg (1.5 lbs)
Drivers unit
8 cm (3-1/4") Cone
Terminal
Spring type color coded
Keyhole slot
1
Grille
Fixed
Magnetic shielding
Specifications and appearance are subject to change without
prior notice.
RCA cable 3.0 m
4 floor pads
STANDBY/ON indicator
Red: Subwoofer in standby mode
Blue: Subwoofer on
With the Auto Standby function, the SKW-501E
automatically turns on when an input signal is
detected in Standby mode. When there's no
input signal for a while, the SKW-501E automat-
ically enters Standby mode.
POWER switch
Press this switch to the ON position to turn on
the power. Press it to the OFF position to turn off
the power.
OUTPUT LEVEL control
This control is used to adjust the volume of the
subwoofer.
LINE INPUT
This RCA input should be connected to the
subwoofer pre out on your AV receiver with
supplied RCA cable.
Pad
Full Range Bass-reflex
6 Ω
120 W
82 dB/W/m
80 Hz to 20 kHz
1.8 L (0.064 cubic feet)
273 mm × 101 mm × 106 mm
(10-3/4" × 4" × 4-3/16")
(incl. grille and projection)
1.0 kg (2.2 lbs)
8 cm (3-1/4") Cone
Spring type color coded
2
Fixed
Magnetic shielding
Full Range Bass-reflex
6 Ω
120 W
81 dB/W/m
80 Hz to 20 kHz
1.1 L (0.039 cubic feet)
101 mm × 175 mm × 116 mm
(4" × 6-7/8" × 4-9/16")
(incl. grille and projection)
0.7 kg (1.5 lbs)
8 cm (3-1/4") Cone
Spring type color coded
1
Fixed
Y1203-3
* 2 9 4 0 0 5 2 7 B *
Advertisement
