Servicing The Engine Oil - Toro GrandStand 74583 Operator's Manual

Mower with 48in, 52in, or 60in turbo force cutting unit
Hide thumbs Also See for GrandStand 74583:
Table of Contents

Advertisement

Servicing the Engine Oil

Oil Type: Detergent oil (API service class SJ or higher)
Oil Capacity: with a filter change, 1.9 L (61 oz); with no
filter change, 1.6 L (54 oz)
Viscosity: See the table below.
0
0
Checking the Engine-Oil Level
Service Interval: Before each use or daily
Note: Check the oil when the engine is cold.
WARNING
Contact with hot surfaces may cause personal
injury.
Keep hands, feet, face, clothing and other body
parts away from the muffler and other hot surfaces.
Important: Do not overfill the crankcase with oil,
because damage to the engine may result. Do not run
engine with oil below the Low mark, because the engine
may be damaged.
1. Disengage the PTO, move the motion-control levers to
the neutral-locked position, and set the parking brake.
2. Stop the engine, remove the key, and wait for all
moving parts to stop before leaving the operating
position
(Figure
42).
SAE 30
50
Figure 41
1
3
6
g017552
8
33
2
5
4
7
10
9
Figure 42
G008792

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Grandstand 74588Grandstand 74589Grandstand 79589

Table of Contents