Step 2. Install The Drip Tray - Curtis SERA2B Service Manual

STEP 2. INSTALL THE DRIP TRAY

8 3/4"
After preparing the drip tray location, according to Step 1, apply Teflon plumbing tape to the threads on the supplied pipe nipple
and thread into the bottom of the drip tray. Assemble the drip tray pieces as shown in Figure 4 and place them into position. Install
the drain system.
INSET FRAME - INSET
INSTALLATIONS ONLY
INSET CUTOUT - INSET
INSTALLATIONS ONLY
21 3/4"
1"
ø1.125
20 1/4"
Figure 3 - Drip Tray Dimensions
DRAIN HOLE - FOR FLUSH
INSTALLATIONS OR INSET
INSTALLATIONS THAT ARE
ENCLOSED ON THE BOTTOM
Figure 4 - Drip Tray Installation
INSET FRAME
REMOVE FOR
FLUSH INSTALLATION
3/4"
7 1/4"
1 5/8"
3