General Operation; Slope Operation - Toro 30438 Operator's Manual

This product is designed for cutting and recycling grass or,
when equipped with a grass bagger, for catching cut grass.
Any use for purposes other than these could prove
dangerous to user and bystanders.

General Operation

Be sure the area is clear of other people before mowing.
Stop the machine if anyone enters the area.
Do not touch equipment or attachment parts which may
be hot from operation. Allow to cool before attempting
to maintain, adjust or service.
Use only Toro-approved attachments. Warranty may be
voided if used with unapproved attachments.
Check carefully for overhead clearances (i.e. branches,
doorways, electrical wires) before operating under any
objects and do not contact them.

Slope Operation

All slopes and ramps require extra caution. If you feel
uneasy on a slope, do not mow it.
Remove obstacles such as rocks, tree limbs, etc. from
the mowing area.
Watch for holes, ruts or bumps. Tall grass can hide
obstacles.
Use caution near drop-offs, ditches, or embankments.
The machine could suddenly turn over if a wheel goes
over the edge of a cliff or ditch, or if an edge caves in.
Use extra care with grass catchers or other attachments.
These can change the stability of the machine.
Keep all movement on slopes slow and gradual. Do not
make sudden changes in speed or direction.
Mow slopes side to side.
Do not mow slopes greater than 15 degrees.
Service
Never store the machine or fuel container inside where
there is an open flame, such as near a water heater or
furnace.
Keep nuts and bolts tight, especially the blade
attachment bolts. Keep equipment in good condition.
Never tamper with safety devices. Check safety systems
for proper operation before each use.
Use only genuine replacement parts to ensure that
original standards are maintained.
Check brake operation frequently. Adjust and service as
required.
5