Connecting The Power/Turning On The Dvd Player - Onkyo DV-S535 Instruction Manual

Connecting the Power/
Turning on the DVD Player
Before connecting
• Make sure that all the connections on pages 8
and 9 are complete (the connection to a TV is
required).
• Turning on the DVD Player may cause a
momentary power surge, which might interfere
with other electrical equipment such as
computers. To prevent the interference, use a
wall outlet on a different circuit.
Thank you for your purchase of Our DVD-Video Player.
Please make a selection
for On-Screen Language and your TV shape and
press ENTER button on your remote control.
FIRST SETUP
On-Screen Language
TV Shape
The remote controller can also
be used to operate step 3.
POWER
DISPLAY DIMMER
1 2
4 5
7 8
MENU
ENTER
RETURN
AUDIO ANGLE SUBTITLE
STOP PLAY
FR FF DOWN
REPEAT A-B
MEMORY CLEAR RANDOM
REMOTE CONTROLLER
10
ENG
4:3LB
OPEN/
CLOSE
SEARCH
3
+ 10
6
9 0
3
TOP MENU
SETUP
SUBTITLE
ON/OFF
PAUSE/STEP
UP
SLOW
ZOOM
RC-419DV
1
Connect the power
cord to a wall outlet.
STANDBY/ON
POWER
DIMMER PAUSE
ON OFF
STANDBY
STANDBY/ON
POWER
ON
STANDBY
STANDBY indicator
(lights up when in
standby mode)
2
Press the POWER switch to
switch on the main power.
The DVD Player enters standby mode.
The STANDBY indicator lights up.
Notes
• The buttons on the remote controller don't operate if the
POWER switch is set to OFF.
• To switch off the main power, press the POWER switch again.
Press STANDBY/ON on the DVD Player
or POWER on the remote controller.
The DVD Player turns on. The STANDBY indicator goes off.
The first time you turn on the DVD Player, the First Setup screen
appears.
With the First Setup screen, select the On-Screen Language and TV Shape
according to the aspect ratio of the TV screen (see pages 30 and 31)
following the steps below.
1 Press / to select "On-Screen Language," then press ENTER (the
center of the cursor).
2 Select a language with
3 Press to select "TV Shape," then press ENTER.
4 Press / to select the aspect ratio of the TV screen, then press
ENTER.
5 Finally press SETUP.
All your selections are set and the First Setup screen disappears.
Notes
• To turn off the DVD Player, press STANDBY/ON on the DVD Player, or POWER on
the remote controller. The DVD Player enters standby mode. Be sure to set the
volume to minimum before turning off the DVD Player for the next use to avoid
sudden loud sound reproduction.
• You can change the above settings later with "Customizing the Function Settings" on
page 28.
CURSOR
OPEN/CLOSE STOP PLAY
ENTER
ACOUSTIC CONTROL
MENU RETURN SETUP
CURSOR
ENTER
OFF
MENU RETURN SETUP
/ , then press ENTER.
To a wall outlet