Connecting The Power/Turning On The Dv-Sp303/Dv-Sp303E - Onkyo DV-SP303 Instruction Manual

Connecting the Power/Turning on the DV-SP303/
DV-SP303E
Before connecting
• Make sure that all the connections on pages 17 – 21
are complete (the connection to a TV is required).
STANDBY/ON
STANDBY/ON
ON
22
OPEN/CLOSE
ON STANDBY
OPEN/
CLOSE
PLAY
MODE
1 2 3
DISPLAY
4 5 6
7 8 9
0 CLEAR
TOP MENU MENU
ENTER
RETURN SETUP
AUDIO ANGLE SUBTITLE ZOOM
RC-616DV
1
American model:
Connect the power cord into the
power outlet on the wall.
Asian, Australian and European
model;
Plug the supplied power cord into
the AC INLET and then into the
PLAY
power outlet on the wall.
• Do not use a power cord other than the
• Never have the power cord discon-
2
Press STANDBY/ON on the DV-
SP303/DV-SP303E or ON on the
STANDBY/ON
remote controller.
The DVD Player turns on.
• To put the DV-SP303/DV-SP303E in
Remote
controller
ON
• Setting the STANDBY/ON button to
Note:
• This player features a screen saver and an auto power
off function. If the player is stopped and no button is
pressed for five minutes, the screen saver starts. If the
disc tray is closed but no disc is playing and no control
is pressed for 30 minutes, the player automatically
goes into standby.
one supplied with the DV-SP303/DV-
SP303E. The power cord supplied is
designed for use with the DV-SP303/
DV-SP303E and should not be used
with any other device.
nected from the DV-SP303/DV-
SP303E while the other end is plugged
into the wall outlet. Doing so may
cause an electric shock. Always con-
nect by plugging into the wall outlet
last and disconnect by unplugging
from the wall outlet first.
To a wall
outlet
the standby mode, press STANDBY/
ON on the DV-SP303/DV-SP303E, or
STANDBY on the remote controller.
Be sure to set the volume to minimum
before putting the DV-SP303/DV-
SP303E in the standby mode for the
next use to avoid sudden loud sound
reproduction.
standby does not shut off the power
completely.