Dometic RTX1000 Operating Manual page 15

CoolAir RTX1000, RTX2000
7.3 Switching the parking cooler to standby mode
➤ Press the
button briefly to switch the parking cooler to standby mode.
✓ The parking cooler saves the current settings.
✓ The Power LED (fig. 2 7, page 3) continues to light up.
I
NOTE
z When the parking cooler is in BOOST mode and switched to
standby mode, it will start the next time in AUTO mode.
z A running timer is set to 0 by switching the parking cooler in
standby mode.
z The parking cooler switches off completely after 12 hours in
standby mode to save power.
7.4 Switching off the parking cooler
➤ Press the
✓ The parking cooler saves the current settings.
✓ The Power LED (fig. 2 7, page 3) goes out.
I
NOTE
z When the parking cooler is in BOOST mode and switched off,
it will start the next time in AUTO mode.
z A running timer is set to 0 by switching off the parking cooler.
z If the parking cooler is switched off while the compressor is still
operating, the fan will continue to run for 20 seconds to dry the
evaporator, among other things.
EN
button for at least 3 seconds to switch off parking cooler.
Using the parking cooler
15