Ac-24/230 Board - Sony SSC-M183 Service Manual

1-4-3. AC-24/230 Board

For SSC-M183/M183CE/M383/M383CE/DC193/
DC193P/DC393/DC393P
Removal
1. Remove the top cover. (Refer to Section 1-3-1.)
2. Remove the front cover assembly. (Refer to Section 1-
3-2.)
3. Remove the rear chassis assembly. (Refer to Section 1-
3-3.)
4. Remove the plate reinforcement. (Refer to Section 1-
6.)
5. Remove the PB-2001/PC-2001 board from the bottom
chassis. (Refer to Section 1-3-3.)
6. Remove the AC-24 board from the bottom chassis.
(Refer to Section 1-3-3.)
7. Remove the solder from the connector (CN102) on the
AC-24 board, then remove the AC-24 board.
Solder
CN102
PB-2001
/PC-2001 board
AC-24 board
SSC-M183/M183CE/M188CE/M383/M383CE/M388CE
SSC-DC193/DC193P/DC198P/DC393/DC393P/DC398P
Installation
1. Attach the AC-24 board in the reverse order of steps 5
2. Insert the marking section of the AC-24 board into the
3. Attach the AC-24 board so that it is placed outside of
4. Attach the AC-24 board in the reverse order of steps 1
Harness
and 6.
groove of the bottom chassis, then attach in the
direction indicated by the arrow.
the claw of the bottom chassis.
to 4.
Marking
AC-24 board
Claw
AC-24 board
Bottom chassis
Groove
Bottom chassis
B 2x5
1-9