Sony SSC-M183 Service Manual page 14

For SSC-M188CE/M388CE/DC198P/DC398P
Removal
1. Remove the top cover. (Refer to Section 1-3-1.)
2. Remove the front cover assembly. (Refer to Section 1-
3-2.)
3. Remove the rear chassis assembly. (Refer to Section 1-
3-3.)
4. Remove the plate reinforcement. (Refer to Section 1-
6.)
5. Remove the PB-2001/PC-2001 board from the bottom
chassis. (Refer to Section 1-3-3.)
6. Remove the AC-230 board from the bottom chassis.
(Refer to Section 1-3-3.)
7. Remove the solder from the connector (CN602) on the
AC-230 board, then remove the PB-2001/PC-2001
board.
Solder
CN602
PB-2001
/PC-2001 board
AC-230 board
1-8
Installation
1. Attach the AC-230 board in the reverse order of steps
2. Insert the marking section of the PB-2001/PC-2001
3. Attach the PB-2001/PC-2001 board so that it is placed
4. Attach the PB-2001/PC-2001 board in the reverse
Harness
6 and 7 of the Removal.
board into the groove of the bottom chassis, then
attach in the direction indicated by the arrow.
outside of the claw of the bottom chassis.
order of steps 1 to 3.
PB-2001
/PC-2001 board
CN602
Solder
Harness
PB-2001
/PC-2001 board
AC-230 board
Bottom chassis
SSC-M183/M183CE/M188CE/M383/M383CE/M388CE
SSC-DC193/DC193P/DC198P/DC393/DC393P/DC398P
Marking
Groove
Bottom chassis
Claw