Sony SSC-M183 Service Manual page 10

4. Remove one screw (B 2x5), then remove the PB-
2001/PC-2001 board from the bottom chassis. (Refer
to Section 1-3-3.)
5. Remove one screw (B 2x5), then remove the plate
reinforcement. (Refer to Section 1-6.)
6. Remove one screw (B 2x5), then remove the AC-24
board from the bottom chassis. (Refer to Section 1-4-
3.)
7. Remove the two screws (PTP 2x5), then remove the
bottom chassis and camera screw from the bottom
cover.
B 2x5
AC-24 board
PB-2001
/PC-2001 board
PTP 2x5
Bottom
chassis
n
Before attaching the rear chassis assembly, securely attach
the AC-24 board.
8. Attach the bottom cover in the reverse order of steps 1
to 7.
1-4
Rear chassis assembly
B 2x5
B 2x5
B 2x5
B 2x5
Plate
reinforcement
Camera screw
Bottom cover
For SSC-M188CE/M388CE/DC198P/DC398P
1. Remove the top cover. (Refer to Section 1-3-1.)
2. Remove the front cover assembly. (Refer to Section 1-
3-2.)
3. Remove the two screws, then remove the rear chassis
assembly.
4. Remove one screw, then remove the PB-2001/PC-
2001 board from the bottom chassis. (Refer to Section
1-3-3.)
5. Remove one screw, then remove the AC-230 board
from the bottom chassis. (Refer to Section 1-4-3.)
6. Remove the two screws, then remove the bottom
chassis and camera screw from the bottom cover.
AC-230 board
B 2x5
PTP 2x5
Bottom
chassis
n
Before attaching the rear chassis assembly, securely attach
the AC-230 board.
7. Attach the bottom cover in the reverse order of steps 1
to 6.
SSC-M183/M183CE/M188CE/M383/M383CE/M388CE
SSC-DC193/DC193P/DC198P/DC393/DC393P/DC398P
Rear chassis assembly
B 2x5
B 2x5
B 2x5
PB-2001/
PC-2001 board
Camera screw
Bottom cover