Sony SSC-M183 Service Manual page 16

For SSC-M188CE/M388CE/DC198P/DC398P
Removal
1. Remove the top cover. (Refer to Section 1-3-1.)
2. Remove the front cover assembly. (Refer to Section 1-
3-2.)
3. Remove the rear chassis assembly. (Refer to Section 1-
3-3.)
4. Remove the PB-2001/PC-2001 board from the bottom
chassis. (Refer to Section 1-3-3.)
5. Remove the AC-230 board from the bottom chassis.
(Refer to Section 1-3-3.)
6. Remove the solder from the (CN602) connector on the
AC-230 board, then remove the AC-230 board.
Solder
CN602
PB-2001
/PC-2001 board
AC-230 board
1-10
Installation
1. Attach the AC-230 board in the reverse order of steps
2. Insert the marking section of the AC-230 board into
3. Attach the AC-230 board so that it is placed outside of
4. Attach the AC-230 board in the reverse order of steps
Harness
5 and 6.
the groove of the bottom chassis, then attach in the
direction indicated by the arrow.
the claw of the bottom chassis.
1 to 4.
Marking
AC-230 board
Claw
AC-230 board
Bottom chassis
SSC-M183/M183CE/M188CE/M383/M383CE/M388CE
SSC-DC193/DC193P/DC198P/DC393/DC393P/DC398P
Groove
Bottom chassis
B 2x5