Table of Contents
Advertisement
Press the strength select button (Fig. 9).
8
Turn the knob to choose the pre-ground
9
coffee setting (Fig. 10).
•
The pre-ground coffee icon lights up.
Press in the centre of the knob to confirm.
10
Then press in the centre of the knob again to
start the brewing process (Fig. 11).
Wait until the coffeemaker has stopped
11
brewing before you remove the jug.
Note:
D
After brewing, coffee drips from the filter
basket for several seconds.
5.4 Setting the timer
The timer enables you to program the time at
which you want the brewing process to start.
Make sure all steps of brewing coffee are taken
with either preground coffee or coffee beans
before setting the timer.
Press the timer button. (Fig. 20)
1
•
On the display 00:00 flashes to indicate
that you have to set the timer.
Turn the knob to set the hour (Fig. 21).
2
Press in the centre of the knob to confirm
3
the hour (Fig. 22).
•
The minutes starts to flash to indicate that
you have to set the minutes.
Turn the knob to set the minutes (Fig. 23).
4
Press in the centre of the knob to confirm
5
the minutes (Fig. 24).
The timer is set and the brewing process will
•
start at the preset time.
5.5 Drip stop function
The drip stop function enables you to remove
the jug from the coffeemaker before the brewing
process is finished. When you remove the jug, the
drip stop stops the flow of coffee into the jug.
Note:
D
The brewing process does not stop when you
remove the jug. If you do not put the jug back
into the appliance within 20 seconds, the filter
basket overflows.
6 Cleaning and
maintenance
6.1 Cleaning after every use
Warning:
B
Never immerse the appliance in water or any
other liquid, nor rinse it under the tap.
Press the on/off button on the front of the
1
appliance to switch off the appliance. (Fig. 25)
Remove the mains plug from the wall socket.
2
Wipe the outside of the coffeemaker with a
3
damp cloth (Fig. 26).
Clean the filter basket and the jug in the
4
dishwasher or with hot water and some
washing-up liquid.
6.2 Cleaning the grinder funnel
Whenever you switch between coffee bean
containers or coffee beans, there will always be
traces left of the previously ground type of coffee
beans that can affect the taste of your coffee.
Clean the grinder funnel every 1 to 2 weeks
or whenever you switch between coffee bean
containers to prevent freshly ground coffee and
traces in the grinder funnel from mixing together.
After you switch to a new type of coffee beans,
follow the steps below to ensure optimal taste.
Press the on/off button on the front of the
1
appliance to switch off the appliance (Fig. 25).
To open the filter basket holder, pull at its tab
2
on the right side of the coffeemaker (Fig. 14).
Take a paper filter (type 1x4 or no. 4) and
3
fold the sealed edges to prevent tearing and
folding. Place the paper filter in the filter
basket. (Fig. 15)
Close the filter basket holder.
4
To open the grinder funnel lid, insert the flat
5
end of the cleaning brush handle into the lock
and press it down (Fig. 27).
9
Advertisement
Table of Contents
