Rinsing The Milk Circuit; Cleaning And Maintenance; Drip Tray And Used Capsule Drawer - Philips Saeco Map Caffitaly Bravista Latte+ Manual

ENGLISH
18
10 The machine stops brewing automatically once it has dispensed
the preset volume. To stop the brewing process, you can press the
espresso button again.
11 Lift the lever to remove the used capsule.

Rinsing the milk circuit

Rinse the milk circuit right after use, to ensure optimal hygiene.
Note: The rinse button lights up as a reminder and it remains lit until the circuit
has been rinsed or the machine has been switched off.
To rinse the milk circuit, perform the following steps:
1 Make sure the milk carafe is in the machine.
2 Place a glass under the milk dispensing spout.
3 Press the rinse button.
,The machine dispenses a quantity of water sufficient to rinse the milk
circuit. When the dispensing stops, remove the glass.
Note: Always put the milk carafe with the remaining milk in the refrigerator.
Rinsing the milk circuit helps to maintain optimal hygiene and
performance of the machine, but only in combination with the cleaning
procedures described in chapter 'Cleaning and maintenance'.
Note: When preparing milk/caffe latte, steam may come out of the steam
outlets. This is normal.

Cleaning and maintenance

Regular cleaning and descaling prolongs the lifetime of your machine and
ensures optimum coffee taste and milk froth quality.
Do not immerse the machine in water or any other liquid.
Never use scouring pads, abrasive cleaning agents or aggressive liquids to
clean the machine.
Always unplug the machine and let it cool down before you clean it.
Do not put the removable parts in the dishwasher, except for the cup
tray, the grill and the internal parts of the frothing system (see section
'Weekly cleaning of the milk carafe) these parts are dishwasher safe.
Use a soft, damp cloth to clean the machine.

Drip tray and used capsule drawer

Clean the used capsule and waste water drawer after each 8-10 cups of
coffee that the machine has brewed.
Check periodically if the used capsule drawer and waste water drawer
are not full to avoid damage and malfunctioning of the machine.
1 Pull the drip tray out off the machine.