Before First Use; Setting The Clock; Switch Off Time - Philips HD7762 User Manual

Hide thumbs Also See for HD7762:
Table of Contents

Advertisement

Do not empty the water reservoir by tilting
the appliance, it can damage the appliance.
Only empty the water reservoir by following
the flush instruction.
Do not use the appliance if the plug, the mains
cord or the appliance itself is damaged.
If a problem occurs that you cannot solve
by means of this user manual, contact the
Consumer Care Centre in your country. If the
problem cannot be solved, take the appliance
to a service centre authorised by Philips for
examination or repair. Do not attempt to
repair the appliance yourself, otherwise your
guarantee becomes invalid.
3.3 Caution
Do not place the appliance on a hot surface
and prevent the mains cord from coming into
contact with hot surfaces.
Unplug the appliance if problems occur during
grinding or brewing and before you clean it.
Do not move the appliance while it is
operating.
The appliance becomes hot during use. Let
the appliance cool down before you store it.
During brewing, the lower part of the
appliance and the bottom of the jug become
hot.
After you have unpacked the appliance, make
sure it is complete and undamaged. If in doubt,
do not use the appliance but contact the
Consumer Care Centre in your country.
This appliance is intended for normal
household use only. It is not intended for
use in environments such as staff kitchens
of shops, offices, farms or other work
environments. Nor is it intended to be used
by clients in hotels, motels, bed and breakfasts
and other residential environments.
3.4 Electromagnetic fields
(EMF)
This Philips appliance complies with all applicable
standards and regulations regarding exposure to
electromagnetic fields.
6
4 Before first use

4.1 Setting the clock

Put the mains plug in the wall socket.
1
00:00 flashes on the display to indicate
that you have to set the clock time.
Turn the knob to set the hour (Fig. 2).
2
Press in the centre of the knob to confirm
3
the hour (Fig. 3).
The minutes start to flash to indicate
that you have to set the minutes.
Turn the knob to set the minutes (Fig. 4).
4
Press in the centre of the knob to confirm
5
the minutes (Fig. 5).
The display shows the set clock time.
6
The coffeemaker is ready for use.
4.2 Setting the automatic

switch off time

You can adjust the time after which the appliance
automatically switches off. The default time is
set to 30 minutes. You can adjust this time to a
maximum of 120 minutes. If you want to adjust
the automatic switch off time, follow the steps
below.
Make sure the appliance is switched off
1
(but the mains plug is in the wall socket).
Press and hold in the centre of the knob until
2
the display starts to flash.
Turn the knob to increase or decrease the
3
time. 1 is 10 minutes, 2 is 20 minutes, 3 is
30 minutes and so on until 12 is 120 minutes.
Press in the centre of the knob to confirm
4
the minutes.
Note:
D
The appliance always saves the last setting.

Advertisement

Table of Contents
loading

Table of Contents