Table of Contents
Advertisement
Using the Fuel-Shutoff
Valve
Close the fuel-shutoff valve for transport, maintenance,
and storage
(Figure
26).
Ensure that the fuel-shutoff valve is open when
starting the engine.
Figure 26
1. O
position
N
Pushing the Machine by
Hand
The bypass valves allow you to push the machine by
hand without the engine running.
Important:
Do not start or operate the machine
with the bypass valves open. Damage to system
may occur.
1.
Park the machine on a level surface, disengage
the PTO, move the motion-control levers to the
N
-L
position, and engage the parking
EUTRAL
OCK
brake.
2.
Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
3.
Raise the platform.
g404658
g031238
2. O
position
FF
4.
Move both bypass levers fully rearward.
5.
Disengage the parking brake.
6.
Push the machine to the desired location.
Important:
Always push the machine by
hand. Do not tow the machine, because
hydraulic damage may occur.
7.
Immediately after moving the machine, engage
the parking brake.
8.
Move both bypass levers fully forward.
24
Figure 27
Figure 28
g412793
g412918
Advertisement
Table of Contents
