Toro Z Master 74141TE Setup Instructions page 12

Dealer Initial Customer Initial
Note: When you, the dealer representative, have finished delivering the machine to the customer, sign and date in
the space provide below and keep a copy of this page for dealer records.
Signature:
Signature:
Show the customer where the following features are located and how they function:
• Hour meter/ Safety Interlock Symbols/ Battery indicator/Fuel Gauge
• Fuel tank cap(s)
• Oil fill cap/Oil dipstick
• Spark plug(s)
• Engine oil filter
• Engine oil drain
• Fuel filter(s)
• Air filter
• Radiator coolant (if applicable)
• Hydraulic fluid reservoir
• Hydraulic filter
• Battery
• Ignition switch
• Throttle lever
• Choke (if applicable)
• Power take off switch (PTO)
• Motion control levers
• Parking brake
• Mower height-of-cut
• Height-of-cut deck lift pedal/ Transport lock
• Z Stand® (if applicable)
• Adjustable seat
• Hydraulic bypass valves
• Rollover Protection System (ROPS)
• Mower deck flow baffle
Refer to the Operator's Manual to point out safety procedures, operation, and
maintenance procedures.
Review the warranty statement as shown in the Operator's Manual.
Describe the post sale service procedures for your store.
Assist the customer in filling out and mailing the registration card or register online at
www.Toro.com
Make sure that the customer receives the Operator's Manual, Engine Owner's Manual,
Set Up Instructions, and operator training material.
Make sure the customer knows the Parts Catalog is available at www.Toro.com.
Assist the customer in loading the mower.
Date:
Date:
12
Check Procedure